Luxury & Precision LP6Ti R2R 7th Anniversary Edition (Sold Out)

Product currently not available
Please note: Only 99 will be made and due December 2021

Luxury & Precision LP6Ti 7th Anniversary Edition

High-performance portable player
4 custom R2R DAC chips
INTEL large industrial grade FPGA
Three types of machine power supply
Level-5 titanium button, face shell
R2R DAC sound
The R2R architecture DAC directly outputs the coded corresponding voltage or current through the principle of resistance voltage division or shunt. R2R DAC sound is more natural than any DELTA SIGMA DAC.
Process for customizing R2R DAC chip
Thousands of precision low temperature drift resistor networks are connected in parallel. In the later stage, the laser and PVD processes are used to adjust and match after secondary processing.
Advantages of custom R2R DAC chip
Integral and differential nonlinear error stability of plus or minus 1.2LSB. 0.018PPM temperature drift is ten thousandth of the flagship DELTA SIGMA DAC chip. The noise within 7nV root hertz is lower than many low-noise op amps.
Large INTEL industrial grade FPGA
INTEL IFDT special promotion, industrial large-scale FPGA
Seven weapons of FPGA
LP’s IP completes seven functions in one FPGA
1. R2R DAC performance multiplier
2. Digital filter
3. Advanced custom EQ
4. Lossless DSD PCMM conversion
5. Low jitter SPDIF OUT
6. Large bandwidth bridge chip
7. Precision clock source
Digital part power supply, the key to the performance of digital audio such as FPGA
Each digital part is independently powered. The digital audio signal and the power supply related to the clock and output have been subjected to secondary filtering. I2S and SPDIF output-related linear power supply for independent IO power supply, even the input and output banks are also separated.
Analog part power supply decoder, pre-stage, post-stage, separate machine architecture
The first group supplies power to the servo circuit of the DAC and DAC voltage parameter reference, similar to an independent decoder.
The second group provides power for buffering, active low-pass filtering and balanced buffering, similar to independent preamplifiers.
The third group supplies power to the amp circuit. The amp is only responsible for current expansion, which is similar to the independent rear stage, with high output and low noise floor.
Independent power supply to the analog part on the reverse side of the circuit board
Isolate outside the shield, away from noise-sensitive chips such as DAC / op amp, the wiring layout is more relaxed.
Peripheral devices give full play to the potential of sound quality
Large silk capacitors and silver-containing tantalum capacitors. Large size alloy inductor, low internal resistance, high continuous current. The copper shield effectively reduces noise interference.
Lossless EQ greatly improves playability
FPGA computing resources bring near-lossless EQ sound quality. The ten-stage EQ reaches the level of EQ machine. Friendly man-machine interface.
High performance
It is equivalent to the use of 32 pcs of PCM1704UK flagship R2R DAC chips. Under high thrust, the THD of the whole machine is less than 0.00045% 127dB.
Large thrust, multiple gains
The balanced output power of 300 ohm earphones is up to 163 mW, and the THD of 32 ohm earphones is less than 0.0005% under high thrust. The balanced output at high gain is up to 7V, and the single-ended output at low gain is only 0.9V, which is suitable for various earphones and earbuds.
Five-stage titanium case is sturdy and portable
Watch-grade materials and processing technology, high specific strength in metal, non-magnetic, stainless, biophilic.
A good horse with a good saddle and a good machine with a good cable
U75 single crystal copper and silver foil wire base, five grade titanium HD800 pin housing, limestone high stable dielectric constant earphones pin.

Specification (Subject to change when announced from L&P)
Model: LP6 Ti 7th Anniversary
Size: 135*69*23mm
Screen: 3.5inch, IPS screen, OGS structure, 480*320 revolution
Body material: level 5 Titanium
Back cover: wood
Master control: 1812C
DAC: 4 high linearity, industrial grade R2R DAC
Crystal Oscillator: low phase noise -160dB active crystal oscillator
Coprocessor: INTEL massive FPGA
Power management chip: 1812P+
PCB: 6 lays 43U zedoary matte black
Inductance: low internal resistance high current metal alloy inductor
Analog circuit filter capacitors: silver-containing military tantalum capacitors, large silk capacitors
Capacity: 64GB 24 Bit ECC FLASH
Extend capacity: 256GB micro SD card (TF)
Charger: DC input voltage range 4.8-5.5V, power adapter output voltage suggest to use 2A and above.(compatible with quick charger)
Battery type: lithium battery
Life time: 8 hours (off screen, normal volume playback of non-high bit rate files, single-ended output)
Set up parameters
Suit for earphones impedance: 8-1000ohm
EQ adjustment: 6 styles adjustment and custom EQ
HP output: 3 models adjustment
DoP SPDDIF: support
Digital filter: multiple filtering modes
Output phase setting: 0-180°
USB connect: MSC mode/audio mode
USB DAC: support
USB Audio delay setting: long delay mode/short delay mode
USB power supply setting: USB power supply mode/self power supply mode
DSD decode setting: Native DSD mode/DSD to PCM mode(to adapt to decoders that only support D2P)
Performance parameters of line output
Distortion + noise: 0.0004%
Signal to noise ratio: 126.5dB (single-ended)
Frequency response: 20Hz-20kHz ± -0.5dB
Channel separation: 98dB 10k load
Line output level: 3.5Vrms / 1.8Vrms / 0.9Vrms switchable design
Headphone output part performance parameters (6.3mm single-ended output)
Output power @ 16ohm, 600mW (distortion rate <0.001% of load power)
Output power @ 32ohm, 320mW (distortion rate> 0.0006% of on-load power)
Output power @ 300ohm, 40mW (distortion rate 0.00045% of on-load power)
Frequency response: 20Hz-20kHz ± -0.5dB
Signal to noise ratio: 126dB
Output impedance: 2.2 ohms
Channel separation: 75dB 32 ohm load
Distortion + noise: 0.00045%
Output voltage: 3.5Vrms
Maximum output current: 300mA 8 ohm
Headphone output part performance parameters (4.4mm balanced output)
Output power @ 32ohm, 800mW (distortion rate <0.0005% of load power)
Output power @ 100ohm, 490mW (distortion rate> 0.00045% of on-load power)
Output power @ 300ohm, 163mW (distortion rate 0.00045% of on-load power)
Frequency response: 20Hz-20kHz ± -0.5dB
Signal to noise ratio: 126dB
Output impedance: 4.4 ohms
Channel separation: 113dB 32 ohm load
Distortion + noise: 0.0016%
Output voltage: 7Vrms
Maximum output current: 300mA 8 ohm
Output power description: LP insists on publishing meaningful output power with actual load and distortion rate of about 0.001%. Although our amp has a perfect overcurrent protection function, we do not recommend exceeding or exceeding the criticality of the output power we announced. The value used, especially some low-resistance earphones, excessive volume may damage hearing.
Support audio format: APE / AAC / ALAC / FLAC / WAV / MP3 / WMA / DFF / DSF / AIFF / SACD-ISO
Audio interface: 6.35mm headphone jack X 1, 3.5mm line output (LO) jack X 1, 4.4mm balanced headphone jack X 1, USB-TYPE C jack (data mode / USB DAC mode) X 1

The original LP6Ti/99 introduction slides: